Spade Terminals & Socket Adaptors

Full Safety Spade Terminal

Part No: 124000/Colour
IEC 1010 Rating: 1000 Volts CAT II Double/Reinforced Insulation 20Amps
Standard Colours: Black, Red
Features: Will accept all standard 4mm plugs.

This product is marked/labelled as per IEC requirements.
UL and CSA labelling upon request, please suffix /UL if ...

Spade Terminal

Part No: 124001/Colour
Standard Colours: Black, Red
Features: For use with retractable shrouded or banana plugs only.

Not to be used above 30 Volts rms.

DIN Rail Terminal Test Adaptor

Part No: 124046
Standard Colours: Grey
Features: Enables DIN Rail mounted terminals to accept 4mm test leads.
Adaptor screws into current bar and allows easy and convenient access.
Uses M3 thread ...

4mm - 4mm Safety Plug Adaptor

Part No: 124044/Colour
Standard Colours: Black, Red
Features: Adapts old style non shrouded Sockets to accept Full Safety Shrouded Plugs.

Not to be used above 30 Volts rms.

4mm - 6/32 Thread Adaptor

Part No: 124045/Colour
Standard Colours: Black, Red
Features: Not to be used above 30 Volts rms.

4mm - 4mm Coupler

Part No: 125099/Colour
IEC 1010 Rating: 1000 Volts CAT III Double/Reinforced Insulation 20Amps
Standard Colours: Black, Red
Features: Ideal for connecting two test leads together.

“T” Socket Apaptor

Part No: 124531/Colour
IEC 1010 Rating: 1000 Volts CAT III Double/Reinforced Insulation 20Amps
Standard Colours: Black, Red
Features: 3 way 4 mm socket enables to extend, adapt, bridge and create a test point.

This product is marked/labelled as per IEC requirements.
UL ...

Low Profile RA Adaptor

Part No: 124166/Colour
IEC 1010 Rating: 1000 Volts CAT III Double/Reinforced Insulation 20Amps
Standard Colours: Black, Red
Features: This product is marked/labelled as per IEC requirements.
UL and CSA labelling upon request, please suffix /UL if required.

Magnetic Test Adap

Part No: 124170/Colour
Standard Colours: Black, Red
Features: 4mm Socket to Rear.

Not to be used above 30 Volts rms
Web Design Hertfordshire by Shy Studios